Full repair kit with air bellows for Tesla X and Tesla S air struts front, type standard 2016-19 models.
The only thing that is needed from the original air strut is the shock absorber/nut itself. Dismantle this, and attach the new aluminum ring with o-ring and stop-ring from the kit, and put straight in.
Note that you get a complete new bellows with this set.
The set consists of 13 parts:
1× aluminium cylinder w/bellows, cuff etc.
1x air nipple 4mm
3× nuts top
1× c-ring for top cover
1× top cover
1x o-ring for top cover
1x stop-ring on shock absorber
1x aluminum ring
1× outer o-ring
2× inner o-rings
For a review on how to unscrew the air strut, and fit it into the repair kit
, watch our video. Put on subtitles, additional info there:
https://youtu.be/gwcmNZiqZe0?si=7dCw6a3wA8fN7kAD
Be aware that fork on old air strut can be difficult to detach. Now, this is not necessary for fitting it into the repair set, as shown in the video above (just put the shock absorber directly into new set with old fork on). But if you still go for it, you should know what you're doing.
We recommend that you pressure test the air bellows when the repair is complete. Kits for this can be found here.
State in the order whether it is air struts for X or S facelift that you are gonna repair. They are marked with OE main number and Vigor®.
If you want an extra fork strut, you can find that here.
Select also in your order below whether the set is for Tesla X or Tesla S.
We only ship within Scandinavia for the time being.